Synology Router Login at 192.168.1.1 and SRM Setup
Synology routers use 192.168.1.1 and the SRM operating system. Admin account created during first-time setup - no default password. Supports VPN, Safe Access parental controls, and mesh.
About Synology SRM Routers
Synology makes a small number of routers and treats them like its NAS boxes: the firmware, called SRM (Synology Router Manager), looks and behaves like a desktop operating system in a browser tab, complete with windows, a package center, and update cycles measured in years of support. People who own a Synology NAS feel at home in about four seconds. There's no factory password to look up, you create the admin account the first time the router boots, so a used unit with an unknown password has to be reset, there's nothing to guess.
What you're actually buying with SRM is the software. Safe Access gives per-user, per-device web filtering and screen-time budgets that competitors charge subscriptions for. VPN Plus turns the router into a serious VPN server. Threat Prevention does inline packet inspection if you want it. All included, all local, no monthly fee, which is the core of the pitch and honestly why the hardware price runs higher than the spec sheet alone would justify.
How to Log In
- 1Connect to the network
Connect your device via Wi-Fi or Ethernet cable to the Synology SRM router.
- 2Open the admin panel
Navigate to
http://192.168.1.1in a browser. - 3Enter credentials
Username: admin. Password: set at first setup. Check the device label for any customized credentials.
| Model | Admin IP | Username | Password |
|---|---|---|---|
Synology SRM (RT6600ax/RT2600ac) | 192.168.1.1 | admin | set at first setup |
Synology Router Models
| Model | Admin IP | Login | Notes |
|---|---|---|---|
RT6600ax | 192.168.1.1 | Admin account created at setup | Wi-Fi 6, 2.5G WAN/LAN |
RT2600ac | 192.168.1.1 | Admin account created at setup | Wi-Fi 5, best VPN support |
MR2200ac (mesh node) | Via primary router | Managed by RT6600ax/RT2600ac | Wi-Fi 5 tri-band |
Troubleshooting
- 1Forgot the SRM admin password
Synology's reset button has two modes and the difference matters. Hold it about 4 seconds (one beep): soft reset, which clears the admin password and a few connection settings but keeps your network config. Hold around 10 seconds (multiple beeps): full factory reset, everything gone. For a lost password you want the 4-second one, then reach the router at 192.168.1.1 and set a new password.
- 2Safe Access blocking legitimate sites
Safe Access → Profiles → the affected profile → Exception List, add the domain. Filtering is category-based and categories misfire sometimes; school sites landing in "unrated" is the classic case.
- 3Can't find the router's address
If DHCP settings were changed and 192.168.1.1 doesn't answer, browse to
router.synology.comfrom inside the network, SRM redirects that to the router's current address. The DS Router phone app also finds it automatically. - 4SRM feels slow or packages won't update
Check Package Center for pending SRM updates first, then reboot from the control panel rather than pulling power. Synology pushes fewer but chunkier updates than most router vendors, and a pending one can sit half-applied in odd states.
Community and Support
Official documentation answers most setup questions, but these communities have thousands of solved threads covering every edge case.
- Synology Community: Official Synology forums. SRM setup, Safe Access configurations, and integration with Synology NAS.
- r/synology on Reddit: Large Synology community covering both NAS and router products.
FAQ
What if the default credentials do not work?
Check the physical label on the device for custom credentials. If the password was changed and is unknown, press and hold the Reset button for 10 seconds to restore factory defaults. After a factory reset, the default credentials listed above will work again.