10.0.1.1 - Apple AirPort Router Login & Setup

The default gateway for Apple AirPort Extreme, AirPort Express, and AirPort Time Capsule routers. Manage your AirPort via browser or the AirPort Utility app.

What Is 10.0.1.1?

10.0.1.1 is the factory-default IP address assigned to Apple AirPort base stations - the AirPort Extreme, AirPort Express, and AirPort Time Capsule. Unlike most consumer routers that use the 192.168.1.x range, Apple chose the 10.0.1.x subnet for their AirPort devices, placing the router at 10.0.1.1 and assigning connected devices addresses starting from 10.0.1.2 upward.

Apple discontinued the AirPort line in April 2018. Existing routers continue to work, but Apple no longer releases firmware updates. If security is a priority, consider replacing your AirPort with a currently supported router.

Supported Models

AirPort Extreme (A1521, A1408), AirPort Express (A1392, A1084), AirPort Time Capsule (A1470, A1409, A1355).

Discontinued April 2018

Apple stopped making and selling AirPort devices in 2018. No firmware updates have been released since. Millions of units remain in use worldwide.

Best Managed via App

AirPort Utility for Mac and iOS provides the full management interface. The web interface at 10.0.1.1 offers basic information only.

Time Capsule Backup

AirPort Time Capsule adds a hard drive for Time Machine backups. Accessible at 10.0.1.1 for network and storage settings.

Accessing Your AirPort via Browser

The AirPort's built-in web interface at 10.0.1.1 provides status information and basic access. For full configuration, use AirPort Utility (see below).

1
Download AirPort Utility

Apple AirPort routers are configured through AirPort Utility - available on macOS (System Preferences) and iOS (App Store). Not via a browser.

2
Open AirPort Utility and find your router

AirPort Utility shows all detected AirPort devices on your network. Click your router icon to manage it.

3
Enter the AirPort password

The router's admin password is the one you set during initial AirPort setup. If forgotten, hold the Reset button for 10 seconds to restore factory defaults.

Managing AirPort with AirPort Utility

Apple's recommended way to manage any AirPort device is through the AirPort Utility application. It provides access to every setting the router offers.

1
Download AirPort Utility

Apple AirPort routers are managed through AirPort Utility on macOS or iOS. Open AirPort Utility and click your AirPort device.

2
Connect to the AirPort network

Connect via Wi-Fi (SSID on the label) or Ethernet to a LAN port on the AirPort Extreme or Time Capsule.

3
Enter the AirPort password and configure

The admin password is the one set during initial setup. If forgotten, hold the Reset button for 10 seconds to restore defaults, then set it again in AirPort Utility.

AirPort Utility for Mac runs on macOS 10.7.5 or later. AirPort Utility for iOS requires iOS 7 or later. Both continue to work even though Apple no longer updates the AirPort hardware firmware.

AirPort Default Credentials

Apple AirPort routers do not ship with pre-set credentials. Instead, you create the admin password during first-time setup in AirPort Utility.

DeviceUsernamePasswordNotes
AirPort Extreme (all gens)NoneSet during setupUse AirPort Utility to set/reset
AirPort Express (all gens)NoneSet during setupUse AirPort Utility to set/reset
AirPort Time CapsuleNoneSet during setupSame password for router and disk

Forgot Your AirPort Password?

If you forgot the AirPort base station password, you need to perform a soft or hard reset:

  • Soft reset: hold reset button 1 second - preserves settings, allows new password
  • Hard reset: hold reset button 5-6 seconds - erases all settings
  • After reset, set up again with AirPort Utility
  • The reset button is on the back of AirPort Extreme/Time Capsule
  • For AirPort Express, the reset button is beside the power port
  • The power LED flashes amber during reset - release when it does

Troubleshooting 10.0.1.1 Access Issues

1
Confirm AirPort is in router mode

If your AirPort is configured as an "Extend a wireless network" or "Join a wireless network" device (bridge/extender mode), it may use a different IP or not have a local admin interface at 10.0.1.1. Check AirPort Utility to see the current mode.

2
Connect via Ethernet for reliability

If Wi-Fi is unstable, plug an Ethernet cable directly from your Mac into the AirPort's Ethernet port. The admin interface is always accessible over a wired connection.

3
Use AirPort Utility instead of the browser

AirPort Utility uses Bonjour to discover and connect to your AirPort without needing to know the IP address at all. If 10.0.1.1 doesn't work in the browser, open AirPort Utility - it will typically find the device automatically.

4
AirPort shows amber LED - there's a problem

An amber (orange) LED on the AirPort means it has detected an issue. Open AirPort Utility for a description of the problem. Common causes: ISP connection failure, double-NAT detected, or a firmware issue.

Frequently Asked Questions

Should I replace my AirPort with a newer router?

If security matters to you, yes. Apple has not released firmware updates for AirPort devices since 2018. Any vulnerabilities discovered after that date remain unpatched. For a home with sensitive data, banking, or business use, switching to a currently-supported router from Asus, TP-Link, or Netgear is the safer choice.

Does AirPort Time Capsule still do Time Machine backups in 2025?

Yes, Time Capsule still functions as a Time Machine destination for Macs running current macOS versions. Apple has not broken compatibility with the device. However, since the hardware is aging and the hard drive inside Time Capsule units is now 7+ years old, data loss from drive failure is a growing risk - keep a secondary backup elsewhere.

My AirPort IP is showing 192.168.1.1, not 10.0.1.1 - why?

This happens when AirPort is connected to another router and set to "bridge mode" or "extend a wireless network." In those configurations, the AirPort does not act as the primary DHCP server, so the main router's IP (often 192.168.1.1) becomes the gateway. AirPort Utility will still find it via Bonjour regardless of the IP.

Can I use a PC (Windows) to manage an AirPort router?

AirPort Utility for Windows existed but Apple stopped supporting and updating it years ago. The last Windows version (5.6.1) may run on older Windows systems but is not officially supported. Your most reliable option on Windows is to access http://10.0.1.1 in a browser for basic status, then use an iOS device with AirPort Utility for full management.

Disclaimer

For educational and informational purposes only. 19216811.org is not affiliated with Apple Inc. AirPort, AirPort Extreme, AirPort Express, and Time Capsule are trademarks of Apple Inc.